Panasonic EP-MAK1 Mode D'emploi page 17

(pour usage domestique) fauteuil vibromasseur
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Insert the power supply plug, turn the lock key switch to "open", and power
switch to "on".
(EN13)
Adjust the pillow position
Remove the pillow and adjust the height of the pillow so that the bottom edge is at ear level.
The strength with which the massage roller presses the neck differs depending on the pillow position.
When the reclining angle changes, the position of the pillow may shift. In that case, adjust the position again.
Pillow
Flip up the comfort cushion to check the main unit
Check the following points:
Is the fabric torn?
Are there foreign objects sandwiched in the
main unit?
Are the massage rollers in their stowed positions?
• When the massage rollers are not in the
retracted position
Press
rollers to the retracted position.
Do not massage with the comfort cushion still
on the backrest.
・The fabric may wear faster.
may be displayed when the body is not detected. (EN42)
Check your sitting position
In order to deliver an effective massage, there is a
bulging area in the center of the seat to make sure you
sit all the way back.
Refer to EN31 for details on correct placement of hands, arms, legs and soles.
twice to return the massage
WARNING
⿟ Always check the fabric covering the backrest or
legrest movable parts has not been ripped before
using the unit. Please also check other areas to
ensure the fabric has not been ripped. No matter
how small the rip, if you find one then immediately
stop using the unit, unplug the power plug and have
the unit repaired at an authorized service center.
(Otherwise it may lead to injury or electric shock.)
Sit down all the way to the back
with your bottom in contact with the
backrest.
Ear level
Lower edge
of pillow
EN17

Publicité

Table des Matières
loading

Table des Matières