Panasonic EP-MAK1 Mode D'emploi page 23

Scanning of shoulder roller position
Massage roller
movements
⁃
While a beeping sound is
being made, the massage
roller rises along the spine
to the vicinity of the neck,
and the massage roller
protrudes.
( When the shoulder position
is not correct, the massage
roller rises again to the
shoulder position repeating
the scanning of shoulder
roller position.)
⁃
Seat surface air operates
to prevent the body from
moving during scanning.
Do not move your
head from the pillow until
tapping action begins!
It will not be able to
accurately detect the
shoulder position.
Tapping
action
⁃
If the shoulder position is greatly shifted, one press of
Rest your shoulders back against the backrest firmly and press the button to start again.
Tapping action
When adjusting the shoulder
position, tapping action is
performed to make it easy to
identify where the massage
rollers are.
⁃
About 30 seconds after starting,
the massage roller gradually
goes down to the shoulder
position and starts tapping.
( When tapping position is
not correct, verify details
described below.)
Massage
roller
⁃
will stop the action.
Complete
When completed, the following
screen is displayed, and the
massaging is started.
⁃
Even during the tapping action,
when you press "OK" , scanning
will end and massage will start.
⁃
To estimate the approximate
height based on the shoulder
position, the legrest may
automatically adjust its
angle so that the sole of the
foot touches.
EN23