Switching Off - Stihl FSA 90 Notice D'emploi

English
Insert the battery (1) in the power
N
tool – the battery slides into the
compartment – press it down
carefully until it snaps into position –
the battery must be flush with the
top of the housing.
Switching On
Make sure you have a secure and
N
firm footing.
Stand upright – hold the power tool
N
in a relaxed position.
Make sure the cutting attachment is
N
not touching the ground or any other
objects.
Hold your trimmer with both hands –
N
right hand on the control handle.
2
Unlock the power tool by moving the
N
retaining latch (2) to ‚.
60
1
Push down the trigger switch
N
lockout (3) and depress the trigger
switch (4) and hold them in that
position.
The motor runs only if the retaining
latch (2) is on ‚ and the trigger switch
lockout (3) and trigger switch (4) are
operated simultaneously.
2
3
4

Switching Off

2
Release the trigger switch
N
lockout (1) and the trigger
switch (2).
3
2
Move the retaining latch (3) to ƒ –
N
the trigger switch (2) cannot be
operated – the power tool is locked
to prevent start-up.
Remove the battery from the power tool
during breaks and after finishing work.
FSA 90, FSA 90 R
1