Switching Off; Storing The Machine - Stihl HLA 65 Notice D'emploi

Switching Off

2
Release the trigger switch
N
lockout (1) and the trigger
switch (2).
3
Move the retaining latch (3) to ƒ –
N
the trigger switch (2) cannot be
operated – the power tool is locked
to prevent start-up.
Always remove the battery from the
power tool during work breaks and after
finishing work.
HLA 65
All manuals and user guides at all-guides.com
Removing the battery
1
Press in both locking tabs (4) at the
N
same time to unlock the battery (5).
Take the battery (5) out of the
N
housing.
When the power tool is not in use, shut it
off so that it does not endanger others.
Secure it against unauthorized use.
2
4
N
N
N
N
4
N
N
Cover for battery compartment (special
accessory)
The cover prevents dirt falling into the
empty battery compartment.
N

Storing the Machine

Move the retaining latch to ƒ.
Remove the battery.
Clean the cutting blades, check
condition and spray them with
STIHL resin solvent.
Fit the blade scabbard.
Thoroughly clean the machine,
especially the cooling air inlets.
Store the machine in a dry and
secure location out of the reach of
children and other unauthorized
persons.
After finishing work, slide the
cover (1) home until it engages
audibly in position.
English
1
51