Checking The Workpiece During A Running Program; Moving The The Service Position; Moving The The Tool-Changing; Position - Amann Girrbach Ceramill Motion Mode D'emploi

6.5 Checking the Workpiece During a
Running Program
▷ Push operation button [A] for at least three sec-
onds.
The program is stopped. The spindle returns to
the rear and the workpiece is turned around.
While travelling, operation button [A] is lit; after
reaching the position, it flashes.
▷ Visually check the workpiece.
▷ Briefly push operation button [A].
The spindle travels to the position, where the
program was interrupted. While travelling, oper-
ation button [A] is lit; after reaching the posi-
tion, it flashes.
▷ Briefly push operation button [A].
The program is continued. Operation button [A]
lights up.
6.6

Moving the the Service Position

The service position can be moved to from the
starting position or from a stopped program.
▷ Briefly push service button [B].
The current tool is placed down and the spindle
returns to the service position. The spindle is
released; the motor is blocked. While travelling,
operation button [A] is lit; after reaching the
position, it flashes.
To exit the service position:
▷ Briefly push operation button [A].
The tool is picked up again. The spindle travels
back to the starting position or to the position,
where the program was interrupted. While trav-
elling, operation button [A] is lit; after reaching
the position, it flashes.
A P P L I C A T I O N A N D O P E R A T I O N
6.7 Moving the the Tool-changing Posi-
tion
The tool-changing position can be moved to from
the starting position or from a stopped program.
▷ Push service button [A] for at least three sec-
onds.
The current tool is placed down and the tool
holder is turned. While travelling, operation but-
ton [A] is lit; after reaching the position, it
flashes.
To exit the tool-changing position:
▷ Briefly push operation button [A].
The tool is picked up again. The spindle travels
back to the starting position or to the position,
where the program was interrupted. While trav-
elling, operation button [A] is lit; after reaching
the position, it flashes.
E N
37