Cleaning, Maintenance And Repair - NovoPress ACO103 BT Manuel D'utilisation

ACO103 BT
Pos : 67 /RVT/Inbetri ebnahme und Betrieb/Ver press en/01- Ü berschrift + Quets chgefahr ACO102, AC O152, ACO/EC O202, AVO202XL, EC O301, AFP/EF P202 @ 0\mod_1386247194505_18.doc x @ 1647 @ 2 @ 1
8.3 Performing the pressing operation
EN
Pos : 68 /RVT/Inbetri ebnahme und Betrieb/Ver press en/02a - Gefahrenber eich AC O102, ACO152 @ 0\mod_1386247719196_18.doc x @ 1653 @ @ 1
Pos : 69 /RVT/Inbetri ebnahme und Betrieb/Ver press en/03 - Info-Haltebolz en AC O/ECO202, EC O301 si ehe Ger ätvorbereiten Punkt 3 @ 0\mod_1389176879013_18.doc x @ 1760 @ @ 1
Pos : 70 /RVT/Inbetri ebnahme und Betrieb/Ver press en/04- BA beachten ACO102, ACO152, AC O/ECO202, AC O202XL, ECO301, AFP/EF P202 @ 0\mod_1386254189959_18.doc x @ 1665 @ @ 1
Pos : 71 /RVT/Inbetri ebnahme und Betrieb/Ver press en/05a - Punkt 1+2 AC O102, ACO152, @ 0\mod_1386330401602_18.doc x @ 1680 @ @ 1
1. Check whether the nominal width of the press fitting corresponds to the nominal width of the
press jaws.
2. Observe the system manufacturer's instructions when fitting the press jaws. (Fig. 8)
Pos : 72 /RVT/Inbetri ebnahme und Betrieb/Ver press en/07 - Info Pr ess bac ke AC O102, ACO152, AC O/ECO202, AFP/EF P202 @ 0\mod_1386668397015_18.doc x @ 1700 @ @ 1
Pos : 73 /RVT/Inbetri ebnahme und Betrieb/Ver press en/13c - Info Start-Tas ter 2mal dr üc ken- Bl uetooth @ 4\mod_1506329760197_18.doc x @ 32075 @ @ 1
Pos : 74 /RVT/Inbetri ebnahme und Betrieb/Ver press en/09a - Punkt 3 AC O102, AC O152, ACO/ECO202, ACO202XL, AF P/EF P202 @ 0\mod_1386672196372_18.doc x @ 1712 @ @ 1
3. To start the process, press the start button.
Pos : 75 /RVT/Inbetri ebnahme und Betrieb/Ver press en/10a - Punkt 4 AC O102, AC O152 @ 0\mod_1386672370698_18.doc x @ 1718 @ @ 1
4. When the pressing operation has been completed:
Pos : 77 /RVT/R einigung, Wartung, R eparatur /01a - Vorsic ht - Einsc halter- ACO102, ACO152, AC O202XL, ACO401, AXI/AAP102 @ 0\mod_1390815867244_18.doc x @ 1770 @ 1 @ 1
9

Cleaning, maintenance and repair

Pos : 79 /RVT/R einigung, Wartung, R eparatur /02 - Ser vic eans chrift - AC O102, AC O152, ACO/EC O202, ACO202XL, EC O301, AC O401, AFP/EF P202, AXI/AAP102 @ 5\mod_1563274700835_18.doc x @ 45254 @ @ 1
CAUTION!
Danger of crushing!
There is a risk that fingers and hands will be crushed.
Therefore:
– Keep body parts and foreign objects away from the press jaws during the pressing
operation.
– Do not hold the jaw levers with your hands during the pressing operation.
CAUTION!
Keep fingers away from the at-risk zone if no press jaw is fitted. (Fig. 4)
Fingers risk being crushed.
Therefore:
– Do not operate the device without the press jaws.
– Keep your fingers away from the at-risk zone.
Information!
The device will not start if the retaining pin (8) is incorrectly inserted. The green LED (2)
flashes.
Information!
Always comply with the operating instructions for the press tools!
Information!
Make sure that the press jaw is fully closed when pressing is complete (Fig. 9).
Information!
If the press device is switched off, briefly press the start button (1) to activate the
press device. Press the start button again to start the pressing operation.
·
Detach the press jaw from the press fitting (Fig. 10).
CAUTION!
Risk of injury during cleaning or repair work from inadvertently pressing
the On switch.
Therefore:
– Comply with the safety instructions and always remove the battery before
performing cleaning, servicing or repair work.
18