NovoPress ACO103 BT Manuel D'utilisation page 16

ACO103 BT
EN
Please read this Operating Manual carefully.
The safety instructions it contains must be observed.
Compliance with local safety regulations is essential!
Pos : 16 /RVT/Sic herheit/Grundl egende Sic her heitshi nweis e/02 - Bruc hstüc ke - unsachgemäß er U mgang - Info @ 0\mod_1380276779411_18.doc x @ 1043 @ @ 1
Pos : 17 /RVT/Allgemeines /#### Seitenumbr uch #### @ 0\mod_1380200837280_0.doc x @ 885 @ @ 1
Information!
This information is directly linked to the description of a function or an operating
sequence.
WARNING!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or
serious injury.
Therefore:
– Save all warnings and instructions for future reference.
WARNING!
Risk of injury from ejected fragments
Incorrect or improper use or the use of worn or damaged press tools and press devices
carries a risk of injury from ejected fragments.
Therefore:
– Press tools and press devices may only be used by trained personnel.
– Compliance with the specified service work and service intervals is mandatory.
– Check the press tools and press devices for cracks and other signs of wear before
each use.
– Separate all press tools and press devices with material cracks or other signs of
wear immediately and do not use them any longer.
– Only use press tools and press devices that are in perfect technical condition.
– Following incorrect use, do not use the press tool and press device any longer and
have them inspected by an authorised workshop.
CAUTION!
Unskilled use may lead to a damaged or malfunctioning press tool and
press device.
Therefore:
– Replace worn press tools immediately and do not use them any longer.
– Use carrying cases for transport and storage and keep press tools and the press
device in a dry room.
– Have damage checked immediately by an authorised workshop.
– Comply with the safety instructions regarding the cleaning and anti-corrosion
agents used.
Information!
Consult the documents provided by the system supplier for handling and assembly
instructions for fittings and pipes.
12