Pos: 67 /RVT/Inbetriebnahme und Betrieb/Verpressen/04- BA beachten ACO102, ACO152, ACO/ECO202, ACO202XL, ECO301, AFP/EFP202 @ 0\mod_1386254189959_18.docx @ 1665 @ @ 1

Information!

Always comply with the operating instructions for the press tools!

Pos: 68 /RVT/Inbetriebnahme und Betrieb/Verpressen/05c - Punkt 1 +2 ACO202XL @ 0\mod_1403009945933_18.docx @ 2740 @ @ 1

Check whether the nominal width of the press fitting matches the nominal width of the press

jaw/press collar.

Comply with the system manufacturer's instructions when fitting the press jaw/press collar

(Fig. 10).

When using a press collar - Fit the adaptor jaw to the press collar as described in the press collar

manufacturer's instructions.

Pos: 69 /RVT/Inbetriebnahme und Betrieb/Verpressen/07b - Info Pressbacke ACO202XL @ 0\mod_1403010151206_18.docx @ 2747 @ @ 1

Information!

Make sure that the press jaw is fully closed when the pressing operation is

complete (Fig. 11)

Pos: 70 /RVT/Inbetriebnahme und Betrieb/Verpressen/08 - Info Pressschlinge ACO/ECO202, ACO202XL, ECO301, AFP/EFP202 @ 0\mod_1386668854154_18.docx @ 1706 @ @ 1

Information!

Ensure there is no gap between the segments of the press collar when the

pressing operation is complete.

Pos: 71 /RVT/Inbetriebnahme und Betrieb/Verpressen/13d - Info Start-Taster 2mal drücken- nur ACO203 BT, ACO203XL BT @ 5\mod_1518439239356_18.docx @ 34652 @ @ 1

Information! (only ACO203XL BT with wireless interface)

If the press device is switched off, briefly press the start button (1) to activate the

press device. Press the start button again to start the pressing operation.

Pos: 72 /RVT/Inbetriebnahme und Betrieb/Verpressen/09a - Punkt 3 ACO102, ACO152, ACO/ECO202, ACO202XL, AFP/EFP202 @ 0\mod_1386672196372_18.docx @ 1712 @ @ 1

To start the process, press the start button.

Pos: 73 /RVT/Inbetriebnahme und Betrieb/Verpressen/10d - Punkt 4 ACO202XL @ 0\mod_1403010916536_18.docx @ 2768 @ @ 1

When the pressing operation has been completed:

•

if using a press collar: first detach the adaptor jaw from the press collar, then

•

detach the press jaw/press collar from the press fitting (Fig. 12).

Pos: 75 /RVT/Reinigung, Wartung, Reparatur/01a - Vorsicht -Einschalter- ACO102, ACO152, ACO202XL, ACO401, AXI/AAP102 @ 0\mod_1390815867244_18.docx @ 1770 @ 1 @ 1

Cleaning, maintenance and repair

CAUTION!

Risk of injury during cleaning or repair work from inadvertently pressing

the On switch.

Therefore:

–

Pos: 76 /RVT/Reinigung, Wartung, Reparatur/02 - Serviceanschrift - ACO102, ACO152, ACO/ECO202, ACO202XL, ECO301, ACO401, AFP/EFP202, AXI/AAP102 @ 5\mod_1563274700835_18.docx @ 45254 @ @ 1

Service addresses

Novopress GmbH Pressen und Presswerkzeuge & Co. KG

Welserstr. 7

41468 Neuss

Germany

You can find the addresses of authorised specialist workshops by contacting Novopress or at

www.novopress.de.

Pos: 77 /RVT/Reinigung, Wartung, Reparatur/03a - Information Wartung - ACO102, ACO152, ACO/ECO202, ACO202XL @ 0\mod_1391004569271_18.docx @ 1796 @ @ 1

Service intervals

Service and repair work may only be carried out by Novopress or the authorised Novopress specialist

workshops.

Information!

The next service deadline is indicated on the press device.

This service must be performed at least every 2 years or at the latest when the LED

display indicates that a service is due (see Section 8.2 Meaning of the LED display).

Pos: 78 /RVT/Reinigung, Wartung, Reparatur/04a - Regelmäßig 1.ter Teil - Bild 13+14--ACO202XL @ 0\mod_1403079614066_18.docx @ 2811 @ @ 1

Routine inspection (before use, at the start of the working day) and when soiled (Fig. 13+14)

Check for visible damage, material cracks and other signs of wear. If defects are found, do not use the

device and have it repaired.

Pos: 79 /RVT/Reinigung, Wartung, Reparatur/05 - Halbjährlich - ACO102, ACO152, ACO/ECO202, ACO202XL, ECO301, ACO401, AFP/EFP202 @ 0\mod_1392970870376_18.docx @ 1846 @ @ 1

•

Comply with the safety instructions and always remove the battery before

performing cleaning, servicing or repair work.

ACO203XL / ACO203XL BT

Table des Matières