Energy Saving Mode - NovoPress ACO203XL Manuel D'utilisation

ACO203XL / ACO203XL BT
The press device can now be connected with the NovoCheck app. (For more information, go to
www.novopress.de) When the connection to the wireless interface was established successfully, the
EN
blue LED (10) lights up.
The blue LED (10) goes out if no connection has been established until the first pressing operation is
performed. A new attempt to establish the connection can only be made if the press device has been
switched off in the meantime. It may be necessary to pull the rechargeable battery for this.
If you do not wish to establish a connection, press the start button (1) once again and perform the
pressing operation.
Pos: 40 /RVT/Kurzbeschreibung/Akku allgemein/Überschrift/AA--ÜS--ACO102, ACO152, ACO202XL, AXI/AAP102, @ 0\mod_1382447195475_18.docx @ 1453 @ 2 @ 1
7.7 Battery
Pos: 41 /RVT/Kurzbeschreibung/Akku allgemein/Info: nicht geladen + Temperaturen/AA--NG--ACO102, ACO152, ACO/ECO202, ACO202XL, AFP/EFP202, AXI/AAP102 @ 2\mod_1469431352019_18.docx @ 21590 @ @ 1
Pos: 42 /RVT/Kurzbeschreibung/Akku allgemein/Akku abnehmen + aufsetzen/AA--AA--ACO102, ACO152, ACO/ECO202, ACO202XL, AFP/EFP202, AAP102 @ 0\mod_1382442983216_18.docx @ 1433 @ @ 1
Removing the battery (Fig. 2)
Push in (1) the two release buttons (A) and then remove the battery (2).
Inserting the battery (Fig. 3)
Slide the battery into the device as illustrated until it clicks into place.
Pos: 44 /RVT/Kurzbeschreibung/Akku allgemein/Akku Zustandsanzeige/ACO/ECO202, ACO202XL, ACO/ECO203 @ 0\mod_1382445046754_18.docx @ 1446 @ @ 1
Battery charge indicator (Fig. 2)
The battery charge is displayed when button (B) is pressed. The number of LEDs lit up denotes the
battery charge. One flashing LED indicates a maximum power reserve of 10%. The battery must be
charged soon.
If the battery is inserted in the press device while the battery charge is being checked, the last
pressing operation must have been completed at least 1 minute prior to this. Otherwise the display will
be inaccurate.
Pos: 45 /RVT/Kurzbeschreibung/Gerät + Akku/Info welcher Akku/18V: ACO203/ACO203 BT/ECO203; ACO203XL/ACO203XL BT (ohne Überschrift) @ 5\mod_1518432967004_18.docx @ 34606 @ @ 1
Pos: 46 /RVT/Kurzbeschreibung/Gerät + Akku/entladener Akku/AG--EA--ACO102, ACO152, ACO/ECO202, ACO202XL, ACO401, ACO/ECO203 @ 0\mod_1382607696426_18.docx @ 1532 @ @ 1
Feature of the press device when the battery is empty:
When a pressing operation begins, a check is made to determine whether the battery charge is
sufficient to complete the pressing operation. If this is not the case the device does not start. The
green LED (2) flashes.
If the green LED (2) flashes following a pressing operation, the pressing operation was carried out
correctly. The battery must be recharged prior to the next pressing operation.
Pos: 47 /RVT/Kurzbeschreibung/Energiesparmodus/Energiesparmodus ACO203/ECO203 @ 4\mod_1506332076890_18.docx @ 32143 @ 2 @ 1

7.8 Energy saving mode

If the press device is not used over an extended period, the device switches off. No LED is lit up any
longer. Press the start button (1) briefly to activate the press device.
Pos: 48 /RVT/Allgemeines/#### Seitenumbruch #### @ 0\mod_1380200837280_0.docx @ 885 @ @ 1
Information!
The batteries are not charged at the factory.
Therefore:
– Charge the batteries before using for the first time.
Information!
Limited temperature range for charging and storing the batteries.
Therefore:
– It is imperative that the operating instructions for the battery charger are complied
with.
Information!
The ACO203XL / ACO203XL BT press device must only be operated with 18 V
rechargeable lithium-ion batteries. The rechargeable 18 V battery must only be
used in the appropriate press devices.
18