Connecting Ac Power Adapter/Charger; Figure 2-2 Power Adapter/Ac-Charger For Dual Channel Flow Meter - Siemens SITRANS FUP101 Mode D'emploi

2.3

Connecting AC Power Adapter/Charger

Connecting the 1015BCK-1 (7ME39404PG00) Power Adapter/Charger
1. Connect the AC power cord to the AC cord input of the Power Adapter/Charger.
2. Plug the Power Adapter/Charger connector into the rear panel Auxiliary Power/Battery
3. Plug the Power Adapter/Charger AC plug into an AC power outlet.
①
AC Cord Input
②
Connect to Rear Panel Power Input Connector
③
Flow Sensor Channel 2
④
Flow Sensor Channel 1
Figure 2-2 Power Adapter/AC-Charger for Dual Channel Flow Meter
FUP1010 IP67 Portable Quick Start
Operating Instructions, 01/2013, CQO:QSG003 Revision 05
Charger input connector.
2.3 Connecting AC Power Adapter/Charger
⑤
Input/Output Connector
⑥
RS-232 Port
⑦
Battery Status Indicator
⑧
Auxiliary Power/Battery Charger Input
Installation
11