Figure 3-5 Hi-Precision Sensor Label - Siemens SITRANS FUP101 Mode D'emploi

①
②
Figure 3-5
Sensor Selection
The following is a typical sensor installation procedure.
1. Press <Left Arrow> to return to Main Menu. At [Meter Type], press the <Right Arrow> and
2. The [Channel Setup] menu will appear.
3. Press the <Down Arrow> to select [Install Sensor].
4. Press the <Right Arrow> to [Sensor Model]. Press <Right Arrow> and scroll to select the
FUP1010 IP67 Portable Quick Start
Operating Instructions, 01/2013, CQO:QSG003 Revision 05
Hi Precision sensor model number
Sensor size
Hi-Precision Sensor Label
then <ENTER>.
sensor model number on the sensor label.
Commissioning
3.3 Setting the Parameters
23