Siemens SITRANS FUP101 Mode D'emploi page 22

Commissioning
3.3 Setting the Parameters
4. Press the <Left Arrow> and return to the main menu.
Table 3- 2 Pipe Configuration Option List Definitions
Fully Developed
1 Elbow
Dble Elbow+
Dble Elbow-
Valve
Expander
Reducer
Norm Entry
Header Inlet
Intrusions
20
①
Use this menu cell to enter the number of pipe diameters between the upstream
configuration and the Sensor installation.
②
Use this menu cell to select the pipe configuration that most accurately represents the
upstream pipe condition.
Options
Fully developed flow, as would be expected for very long
straight pipe runs or installation downstream of a flow
condition.
Single 90 degree Elbow upstream of Sensor installation.
Double out-of-plane Elbows upstream of Sensor installation.
Double in-plane Elbows upstream of Sensor installation.
Not available at this time.
Pipe expansion upstream of Sensor installation.
Pipe reduction upstream of Sensor installation.
Not available at this time.
Header or pipe manifold upstream of Sensor installation.
Not available at this time.
Operating Instructions, 01/2013, CQO:QSG003 Revision 05
Definitions
FUP1010 IP67 Portable Quick Start