Commissioning
3.1
Connecting AC Power
Connecting the 1015BCK-1 (7ME39404PG00) Power Adapter/Charger
1. Connect the AC power cord to the AC Cord input of the Power Adapter/Charger.
2. Plug the Power adapter connector into the rear panel Power input connector.
①
AC Cord Input
②
Connect to Rear Panel Power Input Connector
③
Battery Status Indicator
④
Auxiliary Power/Battery Charger Input
Figure 3-1
Power Adapter/AC Charger for single and Dual Channel Flow Meters
FUP1010 IP67 Portable Quick Start
Operating Instructions, 01/2013, CQO:QSG003 Revision 05
3
13