Milwaukee M12 ONEFTR38 Notice Originale page 20

CALIBRATION
This tool was calibrated at the factory with torque
measurement instruments. Contact a MILWAUKEE service
facility for recalibration. Torque parameters comply with EN
ISO 6789-1:2017
This tool will require recalibration after a period of 12
months or 5.000 cycles, whichever accures fi rst or when
the tool was overloaded. Contact your local Milwaukee Tool
service center for recalibration.
MAINTENANCE
Refer to the ONE-KEY App for information regarding
necessary servicing.
Use only Milwaukee accessories and spare parts. Should
components need to be replaced which have not been
described, please contact one of our Milwaukee service
agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the machine type printed as well as the
six-digit No. on the label and order the drawing at your
local service agents or directly at: Techtronic Industries
GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product
described under "Technical Data" fulfi lls all the relevant
regulations and the directives 2011/65/EU (RoHS),
2014/53/EU, 2006/42/EC, and the following harmonized
standards have been used:
EN 62841-1:2015
EN 55014-1:2017
EN 55014-2:2015
EN 62479:2010
EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EN 300 328 V2.1.1 (2016-11)
EN ISO 6789-1:2017
EN IEC 63000:2018
Winnenden, 2019-08-19
Alexander Krug
Managing Director
Authorized to compile the technical fi le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
A calibration certifi cate is accompanied with the product
and includes the specifi serial number and all relevant
information according to EN ISO 6789-1:2017.
20 ENGLISH
470 221 - M12 ONEFTR38, M12 ONEFTR12.indd 20 470 221 - M12 ONEFTR38, M12 ONEFTR12.indd 20
SYMBOLS
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any
work on the machine.
Please read the instructions carefully before
starting the machine.
Do not swallow the coin cell battery!
Do not dispose electric tools, batteries/
rechargeable batteries together with household
waste material.
Electric tools and batteries that have reached the
end of their life must be collected separately and
returned to an environmentally compatible
recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
n
Rated speed
V
Volts
Direct current
European Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
08.11.2019 09:22:01 08.11.2019 09:22:01