Ec Declaration Of Conformity - Milwaukee M18 HDCT Notice Originale

page de 127

/ 127
Matières
Table des Matières
Signets

Table des Matières

Les langues disponibles

To avoid injury and damage, never immerse the device, removable

battery or charger in liquid or allow liquid to penetrate them.

Further service and repair work may only be carried out by authori-

sed specialist workshops.

The device contains hydraulic uid. Hydraulic uids pose a hazard

to groundwater. Uncontrolled draining or improper disposal is

punishable by law.

The next service deadline is indicated by LED on the device.

This service must be performed at least every 2 years or after

40,000 crimping operations or at the latest when the LED display

indicates that a service is due. Use only Milwaukee accessories and

Milwaukee spare parts. Should components need to be replaced

which have not been described, please contact one of our Milwau-

kee service agents (see our list of guarantee/service addresses).

If needed, an exploded view of the tool can be ordered. Please

state the Article No. as well as the machine type printed on

the label and order the drawing at your local service agents or

directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10,

71364 Winnenden, Germany.

ONE KEY™

To learn more about the ONE-KEY functionality of this device,

please refer to the Quick Start guide included with this product or

go to http://www.milwaukeetool.com/one-key

To download the ONE-KEY app, visit the App Store or Google Play

from your smart device.

We considered the result to be within our minimum acceptable

performance level according to EN 301489-1/ EN 301489-17. And we

will give the operation guidance to the customer in user manual.

BATTERIES

Battery packs which have not been used for some time should be

recharged before use.Temperatures in excess of 50°C (122°F) reduce

the performance of the battery pack. Avoid extended exposure to

heat or sunshine (risk of overheating).

The contacts of chargers and battery packs must be kept clean.

For an optimum life-time, the battery packs have to be fully

charged, after use.

To obtain the longest possible battery life remove the battery pack

from the charger once it is fully charged.

For battery pack storage longer than 30 days: Store the battery

pack where the temperature is below 27°C and away from moisture

Store the battery packs in a 30% - 50% charged condition Every six

months of storage, charge the pack as normal.

Do not dispose of used battery packs in the household refuse or

by burning them. Milwaukee Distributors o er to retrieve old

batteries to protect our environment.

Do not store the battery pack together with metal objects (short

circuit risk).

Battery acid may leak from damaged batteries under extreme load

or extreme temperatures. In case of contact with battery acid wash

it o immediately with soap and water. In case of eye contact rinse

thoroughly for at least 10 minutes and immediately seek medical

attention.

No metal parts must be allowed to enter the battery section of the

charger (short circuit risk).

Deutsch

TRANSPORTING LITHIUM BATTERIES

Lithium-ion batteries are subject to the Dangerous Goods Legisla-

tion requirements.

Transportation of those batteries has to be done in accordance with

local, national and international provisions and regulations.

The user can transport the batteries by road without further

requirements.

Commercial transport of Lithium-Ion batteries by third parties is

subject to Dangerous Goods regulations. Transport preparation and

transport are exclusively to be carried out by appropriately trained

persons and the process has to be accompanied by corresponding

experts.

When transporting batteries:

Ensure that battery contact terminals are protected and insulated

to prevent short circuit. Ensure that battery pack is secured against

movement within packaging. Do not transport batteries that are

cracked or leak. Check with forwarding company for further advice