Ec Declaration Of Conformity - Milwaukee M18 HCC45 Notice Originale

EC DECLARATION OF CONFORMITY

We declare under our sole responsibility that the product described
under "Technical Data" ful lls all the relevant provisions of the
directives
2011/65/EU RoHS, 2006/42/EC, 2014/30/EU, 2014/53/EU
and the following harmonized standards have been used.
EN 62841-1:2015
EN 62479:2010
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+AC:2011+A2:2013
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:2015
EN 50581:2012
EN 301 489-1 V1.9.2 (2011-09)
EN 301 489-17 V2.2.1 (2012-09)
EN 300 328 V1.9.1 (2015-02)
Winnenden, 2017-05-03
Alexander Krug / Managing Director
Authorized to compile the technical le
Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
SYMBOLS
Please read the instructions carefully before starting the
machine.
WARNING!
Risk of injury from ejected fragments
Always wear goggles when using the machine.
Danger of electric shock
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work on the
appliance.
Keep hands away from cutting tools and other moving
parts. Fingers may get caught in the cutting mechanism
and be amputated or injured.
Accessory - Not included in standard equipment, available
as an accessory.
Do not dispose of electric tools together with household
waste material. Electric tools and electronic equipment
that have reached the end of their life must be collected
separately and returned to an environmentally compatible
recycling facility. Check with your local authority or
retailer for recycling advice and collection point.
European Conformity Mark
UkrSEPRO Conformity Mark
EurAsian Conformity Mark
GB
English
19