Wipe Disinfection For Electrical Devices Without Sterilization; Inspection, Maintenance And Checks; Maintenance - B.Braun Aesculap ELAN EC GA830 Description Technique Et Mode D'emploi

Aesculap
ELAN EC motor with right/left rotation (without irrigation unit/with irrigation
unit)
Validated cleaning and disinfection procedure
Validated procedure Special features
■
Wipe disinfection for
electrical devices with-
out sterilization
5.6

Wipe disinfection for electrical devices without sterilization

Phase Step
I Wipe disinfection
RT: Room temperature
Phase I
►
Remove any visible residues with a disposable disinfectant wipe.
►
Wipe all surfaces of the optically clean product with a fresh, disposable
disinfectant wipe.
►
Observe the specified application time (1 min minimum).
5.7

Inspection, maintenance and checks

►
Inspect the product after each cleaning and disinfecting cycle to be
sure it is: clean, functional, and undamaged.
►
Set aside the product if it is damaged.
6.

Maintenance

To ensure reliable operation, the product must be maintained at least once
a year, including the power cord and foot control.
For technical service, please contact your national B. Braun/Aesculap
agency, see Technical Service.
12
®
Keep the coolant pump open during cleaning and close again after
cleaning.
T t Conc.
[°C/°F] [min] [%]
≥1
RT -
Water quality Chemical
- Meliseptol HBV wipes 50 % Propan-1-ol
Reference
Chapter Wipe disinfection for electrical devices
without sterilization