Manual Cleaning/Disinfecting; Manual Cleaning And Wipe Disinfection - B.Braun Aesculap Mode D'emploi

Aesculap Sterile Technology
Sterile container system

5.3 Manual cleaning/disinfecting

Inspect visible surfaces for residual contamination after manual
cleaning/disinfecting.
Repeat the cleaning process if necessary.

Manual cleaning and wipe disinfection

Stage Step
I Cleaning
II
Drying
III Wipe disinfection
IV Final rinse
V Drying
D–W: Drinking water
FD–W: Fully desalinated water (demineralized)
RT: Room Temperature
Stage I
Wipe off gross debris prior to cleaning.
Stage II
Dry the product with lint-free tissue or medical-quality filtered
compressed air.
Stage III
Carry out wipe disinfection.
Stage IV
When using aldehyde-free disinfectants:
After the specified exposure time (at least 1 minute), rinse the
disinfected surfaces under running FD water.
Allow water to drip off for a sufficient length of time.
Stage V
Dry the product with lint-free tissue or in a heating cabinet.
8
T t Conc.
[°C/°F] [min] [%]
RT - -
(cold)
RT - -
- 1 -
>
RT - -
(cold)
RT - -
Water
quality
D–W -
- -
- I
Alcohol Denat. 70 %
(ethanol B|BRAUN)
FD–W not required
- -
Chemical
II
Aldehyde-free surface
disinfectant (Stabimed)
Rinse off cleaning
chemicals; do not leave
residues
-