Technical Service; Accessories And Replacement Parts; Technical Specifications; Extracts From Relevant Standards - B.Braun Aesculap Mode D'emploi

Malfunction
Basis/Vario sterile container or PrimeLine
sterile container system deformed
Inner or outer lid cannot be positioned or
locked on the bottom component

7. Technical Service

Risk of injury and/or malfunction!
Do not modify the product.
WARNING
For service and repairs, please contact your national B. Braun/Aesculap
agency.
Modifications carried out on medical technical equipment may result in
loss of guarantee/warranty rights and forfeiture of applicable licenses.
Service addresses
Aesculap Technischer Service
Am Aesculap-Platz
78532 Tuttlingen / Germany
Phone: +49 7461 95-1602
Fax: +49 7461 16-5621
E-mail: ats@aesculap.de
Other service addresses can be obtained from the address indicated above.

8. Accessories and replacement parts

Accessories and supplies are listed in brochure no. C40401.
Cause
Perforations covered during sterilization
Container lid or bottom deformed or
damaged due to improper
(e.g. carrying by the lid)

9. Technical specifications

The variants and sizes of sterile containers are listed in brochure no.
C40401.

10. Extracts from relevant standards

10.1 Standards cited

The following standards are cited in connection with the sterile
containers:
• DIN 58953-9
• EN 285
• EN 868-8
• EN 285 in combination with EN ISO 17665
• EN ISO 11607
Remedy
Never cover perforations
Replace container lid or bottom, or have
handling components repaired by the manufacturer
11