Fitting The Harness - Stihl HTE 60 Notice D'emploi

English
1
2
Insert the plug (1) into the extension
N
cord coupling (2).
Strain Relief
The strain relief (cord retainer) protects
the appliance cord against damage.
48
3
5
4
Make a loop (3) in the extension
N
cord.
Pass the loop (3) through the
N
opening (4).
Slip the loop (3) over the hook (5)
N
and pull it tight.
Connect the extension cord plug to
N
a properly installed wall outlet.

Fitting the Harness

A shoulder strap may be used if required
(special accessory).
The type and style of the shoulder strap
depend on the market.
Shoulder strap
2
Put on the shoulder strap (1).
N
Adjust the length of the strap so that
N
the spring hook (2) is level with your
right hip when the machine is
attached.
1
HTE 60