Specifications - Stihl HTE 60 Notice D'emploi

Specifications

Motor
Voltage: 230 - 240 V
Rated current: 7 A
Frequency: 50 Hz
Power consumption: 1.45 kW
Rated speed under
load: 11,000 rpm
Fuse: 10 A
Insulation: II, E
Chain Lubrication
Fully automatic, speed-controlled oil
pump with rotary piston
Oil tank capacity: 220 cc (0.22 l)
Weight
without cutting attachment
4.5 kg
Cutting Attachment
Actual cutting length may be less than
the specified length
Rollomatic E Mini guide bar
Cutting length: 30 cm
Pitch: 3/8" P (9.32 mm)
Groove width: 1.1 mm
HTE 60
Rollomatic E Mini Light guide bars
Cutting length: 25, 30 cm
Pitch: 3/8" P (9.32 mm)
Groove width: 1.1 mm
3/8" P chains
Picco Micro Mini 3 (61 PMM3)
Type 3610
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 1.1 mm
Chain sprocket
6-tooth for 3/8" P
7-tooth for 3/8" P
Noise and Vibration Data
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib/
Noise and vibration data are determined
on the basis of the rated maximum
speed.
Sound pressure level L to
p
EN ISO 11680-1
HTE 60: 94 dB(A)
Sound power level L to EN ISO 11680-
w
1
HTE 60: 106 dB(A)
Vibration measurement a
hv
EN ISO 11680-1
Left handle: 3.6 m/s
Right handle: 4.8 m/s
The K-factor in accordance with
Directive 2006/42/EC is 2.5 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration measurement.
The vibration values quoted above have
been measured according to a
standardized test procedure and may be
used to compare electric power tools.
Depending on the type of usage, the
vibrations that actually occur may differ
from the values quoted.
The vibration values quoted may be
used for an initial assessment of the
user's exposure to vibrations.
The actual exposure to vibrations has to
be evaluated. This process may also
take into account times during which the
electric power tool is switched off and
times during which it is switched on but
running without load.
Observe measures to reduce vibration
exposure to protect the user – see
section on "Vibrations" in chapter on
"Safety Precautions and Working
Techniques".
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
to
see www.stihl.com/reach.
2
2
English
2
59