Specifications - Stihl FS 38 Notice D'emploi

English
3 Stop Switch
Switches the engine's ignition off
and stops the engine.
4 Throttle Trigger Lockout
Must be depressed before the
throttle trigger can be activated.
5 Throttle Trigger
Controls the speed of the engine.
6 Choke Lever
Eases engine starting by enriching
mixture.
7 Air Filter Cover
Covers and protects the air filter
element.
8 Fuel Filler Cap
For closing the fuel tank..
9 Fuel Tank
For fuel and oil mixture.
10 Machine Support
For resting machine on the ground.
11 Fuel Pump
Provides additional fuel feed for a
cold start.
12 Carburetor Adjusting Screws
For tuning the carburetor.
13 Starter Grip
The grip of the pull starter, for
starting the engine.
14 Spark Plug Boot
Spark plug boot connects the spark
plug with the ignition lead.
30
15 Muffler (with Spark Arresting
Screen)
Muffler reduces exhaust noises and
diverts exhaust gases away from
operator.
Spark arresting screen is designed
to reduce the risk of fire.
16 Spacer
Designed to reduce the risk of burns
and fire.
17 Line Limiting Blade
Metal blade on the deflector which
keeps the line of the mowing head
at the proper length.
18 Deflector
The deflector is designed to reduce
the risk of injury from foreign objects
flung backwards toward the
operator by the cutting attachment
and from contact with the cutting
attachment.
19 Mowing Head
The cutting attachment, i.e. mowing
head, for different purposes.
20 Drive Tube
Encloses and protects the drive
shaft between the engine and
gearbox.

Specifications

EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
Engine
Single cylinder two-stroke engine
Displacement: 27.2 cm
Bore: 34 mm
Stroke: 30 mm
Engine power to 0.65 kW (0.9 HP)
ISO 8893: at 8,500 rpm
Idle speed: 2,800 rpm
Cut-off speed (rated): 9,500 rpm
Max. output shaft
speed (cutting
attachment): 9,500 rpm
Ignition System
Electronic magneto ignition
Spark plug (resistor Bosch WSR 6 F,
type): NGK BPMR 7 A
Electrode gap: 0.5 mm
3
FS 38