Stihl FS 38 Notice D'emploi page 10

Masquer les pouces Voir aussi pour FS 38:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
Symbols on Deflectors
An arrow shows the direction of rotation
of the cutting attachments.
Mowing Head with Nylon Lines
Nylon line achieves a soft cut for edging
and trimming around fence posts, trees,
etc. – less risk of damaging tree bark.
8
WARNING
To reduce the risk of injury, never use
steel wire in place of the nylon cutting
line.
STIHL FixCut
Check the wear limit marks!
If the raised moldings (1) on the
N
base of the attachment are worn as
shown in the illustration (above
right), do not continue using the
mowing head. Install a new one.
There is otherwise a risk of injury
from thrown parts of the head.
STIHL PolyCut 6-3 Mowing Head with
Polymer Blades
1
2
For mowing unobstructed edges of
meadows (without posts, fences, trees
or similar obstacles).
It is important to follow the maintenance
instructions for the Polycut mowing
head.
Check the wear limit marks!
Wear limit marks are integrated in the
base of the PolyCut.
Do not continue using the PolyCut 6-3 if
one of the circular holes (1; arrow)
becomes visible or if the projecting rim
(2; arrow) has worn away. Install a new
mowing head.
FS 38

Publicité

Chapitres

Table des Matières
loading

Table des Matières