Specifications - Stihl HSE 42 Notice D'emploi

English
1 Power cord
2 Strain relief (cord retainer)
3 Lock for strain relief
4 Trigger
5 Trigger switch lockout
6 Switch lever
7 Loop handle
8 Hand guard
9 Cutting blades (HSE 42) – see "Specifica‐
tions"
10 Cutting blades (HSE 52) – see "Specifica‐
tions"
11 Blade scabbard
12 Blunt projection (integral cutter guard)
13 Tip guard (HSE 52 only)
# Serial number

12 Specifications

12.1 Motor
12.1.1 HSE 42
Voltage:
Rated current:
Frequency:
Power consumption:
Fuse:
Insulation:
12.1.2 HSE 52
Voltage:
Rated current:
Frequency:
Power consumption:
Fuse:
Insulation:
12.2 Cutting Blade
12.2.1 HSE 42
Sharpening angle:
Tooth spacing:
Stroke rate:
Cutting length:
12.2.2 HSE 52
Sharpening angle:
Tooth spacing:
Stroke rate:
Cutting length:
* Versions with 10
m appliance cord for UK
26
12.3
HSE 42:
HSE 42
HSE 52:
HSE 52
12.4
Sound and vibration levels are determined on
the basis of the operating status at nominal maxi‐
mum speed.
For further details on compliance with Vibration
Directive 2002/44/EEC, see
www.stihl.com/vib
12.4.1
HSE 42:
HSE 52:
12.4.2
HSE 42:
HSE 52:
12.4.3
220 - 240 V
1.9 A
50 - 60 Hz
420 W
HSE 42:
min. 10 A
HSE 52:
II, E
The K‑factor in accordance with Directive
2006/42/EC is 2.0 dB(A) for the sound pressure
220 - 240 V level and sound power level; the K‑factor in
2.1 A
accordance with Directive 2006/42/EC is
50 - 60 Hz
2.0 m/s
460 W
min. 10 A
The vibration values quoted above have been
II, E
measured according to a standardized test pro‐
cedure and may be used to compare electric
power tools.
Depending on the type of usage, the vibrations
36°
that actually occur may differ from the values
21 mm
quoted.
3,400/min
450 mm
The vibration values quoted may be used for an
initial assessment of the user's exposure to
vibrations.
32°
The actual exposure to vibrations has to be eval‐
23 mm
3,400/min uated. This process may also take into account
500 mm
times during which the electric power tool is
switched off and times during which it is switched
on but running without load.
Weight
1)
:
1)
:
Sound and Vibration Levels
Sound pressure level L
DIN EN 60745-2-15
Sound power level L
DIN EN 60745-2-15
Vibration measurement a
to DIN EN 60745-2-15
Handle, left
2
3.1 m/s
2
3.1 m/s
2
for the vibration level.
12 Specifications
3.0 kg
3.6 kg
3.1 kg
3.7 kg
according to
p
84 dB(A)
84 dB(A)
according to
w
95 dB(A)
95 dB(A)
according
hv
Handle,
right
2
1.5 m/s
2
1.5 m/s
0458-762-9621-B