Model Number Description - Scotsman C1448R Manuel D'installation

Model Number Description

Example
•
C1448MR-6A
•
C=cuber
•
14=nominal capacity in 100s of pounds
•
48=nominal width of cabinet in inches
•
S=cube size, S=small or half dice,
M=medium or full dice
•
R=condenser type. R=Remote
•
-6=Electrical code. -6=230/50/1,
•
A=series revision code. A=first series.
Note: In some areas of this manual model numbers
may include only the first five characters of the
model number, meaning that cube size, condenser
type and voltage differences are not critical to the
information listed there.
Options:
There are several options available for field
installation. They include:
•
Vari-Smartä Adjustable ice level system
•
Smart-Boardä Advanced feature control
Some installations require bin or dispenser
adapters. See the table below.
Standard bin applications – Adapter information
Model BH900* or B948
C1448, C1848 Direct fit, no
or C2148 adapter needed
* If stainless steel Kbaffle3 has been installed,
remove it and replace with the original plastic
baffle.
Other bins and applications:
Note the drop zone and optional ultrasonic sensor
locations in the illustrations.
Remote Condenser Models - Installation Manual
Scotsman assumes no liability of responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the
use of any part and/or other components not
specifically approved by Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and design are subject to change
without notice.
BH1100,
BH1300 or
BH1600
Adapter panels
included with
bin, no adapter
needed
June 2007
Page 3
C1448, C1848, C2148