Use And Operation - Scotsman C1448R Manuel D'installation

Use and Operation

Once started, the ice machine will automatically
make ice until the bin or dispenser is full of ice.
When ice level drops, the ice machine will resume
making ice. There are four indicator lights at the
front of the machine that provide information on the
condition of the machine.
Caution: Do not place anything on top of the ice
machine, including the ice scoop. Debris and
moisture from objects on top of the machine can
work their way into the cabinet and cause serious
damage. Damage caused by foreign material is not
covered by warranty.
Indicator Lights:
•
Power
•
Status
•
Water
•
Clean
Power
Steady Green Normal
Blinking Self Test
Green Failure
Blinking Red -
Yellow -
Blinking
-
Yellow
Light off No power
All Blinking Unit remotely locked out – check with leasing company
If the Water light is on, the machine has sensed a
lack of water. Check the water supply to the
machine. The water may have been shut off or the
water filter cartridges need to be changed.
If the Clean light is on, the machine has determined
that it may need to be cleaned. Contact an
authorized Scotsman service agent and have the
machine cleaned, de-scaled and sanitized.
Remote Condenser Models - Installation Manual
Indicator Lights & Their Meanings
Status
Normal – bin full or making ice
Switching on or off
Diagnostic shutdown or, if
making ice, temperature sensor
failure
-
-
Switched off
Note: A Component Indicator Light switches ON to
indicate that the component is operating.
Note: There are two Curtain Switch lights, SW1 and
SW2. A curtain switch light is ON when a curtain is
either open or not present.
June 2007
Page 17
C1448, C1848, C2148
Water De-Scale & Sanitize
- -
- -
Lack of
-
water
Time to de-scale and
-
sanitize
- In Cleaning mode
Normal Normal