Specific Safety Rules - Homelite HPW-2200 Manuel D'utilisation

GB
F D E I
IMPORTANT SAFETY INSTRUCTIONS
BEFORE CLEANING, REPAIRING, OR INSPECTING,
■
shut off the engine and make certain all moving parts
have stopped. Disconnect the spark plug wire,
and keep the wire away from the plug to prevent
accidental starting.
AVOID DANGEROUS ENVIRONMENT. Don't use in
■
damp or wet locations or expose to rain. Keep work
area well lit.
NEVER USE IN AN EXPLOSIVE ATMOSPHERE.
■
Normal sparking of the motor could ignite fumes.
DO NOT OPERATE WHILE SMOKING OR NEAR
■
AN OPEN FLAME.
DO NOT OPERATE AROUND dry brush, twigs,
■
cloth rags, or other flammable materials.
WARNING: RISK OF INJECTION OR INJURY.
■
Do not direct discharge stream at persons.

SPECIFIC SAFETY RULES

NEVER DIRECT A WATER STREAM TOWARDS
■
PEOPLE OR PETS, OR ANY ELECTRICAL
DEVICE.
BEFORE STARTING ANY CLEANING OPERATION,
■
close doors and windows. Clear the area to be
cleaned of debris, toys, outdoor furniture, or other
objects that could create a hazard.
NEVER PICK UP OR CARRY A MACHINE WHILE
■
THE ENGINE IS RUNNING.
NEVER START THE MACHINE if ice has formed in
■
any part of the equipment.
DO NOT USE ACIDS, ALKALINES, SOLVENTS,
■
FLAMMABLE MATERIAL, OR INDUSTRIAL
GRADE SOLUTIONS in this product. These products
can cause physical injuries to the operator and
irreversible damage to the machine.
ALWAYS OPERATE THE MACHINE on a level
■
surface. If the engine is at an incline, it could seize due
to improper lubrication (even at the maximum oil level).
WARNING: HIGH PRESSURE JETS CAN BE
■
DANGEROUS IF
The jet must not be directed at persons, animals,
electrical devices, or the machine itself.
NEVER ATTEMPT TO MAKE ANY ADJUSTMENTS
■
WHILE THE ENGINE (MOTOR) IS RUNNING
(except where specifically recommended by the
manufacturer).
P NL S DK N FIN GR HU
SUBJECT TO MISUSE.
CZ RU RO PL SLO HR TR EST LT
English
PROTECTIVE COVERS MUST ALWAYS COVER
■
ROTATING PARTS WHEN THE ENGINE IS
RUNNING.
KEEP COOLING AIR INTAKE (recoil starter area)
■
and muffler side of the engine at least 1m away from
buildings, obstructions, and other burnable objects.
KEEP THE ENGINE AWAY FROM FLAMMABLES
■
AND OTHER HAZARDOUS MATERIALS.
KEEP AWAY FROM HOT PARTS. The muffler and
■
other engine parts become very hot, use caution.
DO NOT TOUCH THE SPARK PLUG AND IGNITION
■
CABLE when starting and operating the engine.
CHECK FUEL HOSES AND JOINTS for looseness
■
and fuel leakage before each use.
CHECK BOLTS AND NUTS for looseness before
■
each use. A loose bolt or nut may cause serious
engine problems.
HIGH PRESSURE CLEANER SHALL NOT BE USED
■
BY CHILDREN OR UNTRAINED PERSONNEL.
USE HEAR PROTECTION DEVICE.
■
USE ONLY HOSES, FITTINGS AND COUPLINGS
■
RECOMMENDED BY THE MANUFACTURER.
ALWAYS REFUEL OUTDOORS. Never refuel
■
indoors or in a poorly ventilated area.
NEVER STORE THE MACHINE WITH FUEL IN THE
■
FUEL TANK INSIDE A BUILDING where ignition
sources are present, such as hot water and space
heaters, clothes dryers, and the like.
IF THE FUEL TANK HAS TO BE DRAINED,
■
DO THIS OUTDOORS.
TO REDUCE THE RISK OF FIRE AND BURN
■
INJURY, handle fuel with care. It is highly flammable.
DO NOT SMOKE WHILE HANDLING FUEL.
■
ADD FUEL BEFORE STARTING THE ENGINE.
■
Never remove the cap of the fuel tank or add fuel
while the engine is running or when the engine is hot.
LOOSEN FUEL CAP SLOWLY to release pressure
■
and to keep fuel from escaping around the cap.
REPLACE ALL FUEL TANK AND CONTAINER
■
CAPS SECURELY.
WIPE SPILLED FUEL FROM THE UNIT. Move 9 m
■
away from refueling site before starting engine.
IF FUEL IS SPILLED, do not attempt to start the
■
engine but move the machine away from the area of
spillage and avoid creating any source of ignition until
fuel vapors have dissipated.
NEVER ATTEMPT TO BURN OFF SPILLED FUEL
■
UNDER ANY CIRCUMSTANCES.
BEFORE STORING, ALLOW THE ENGINE TO
■
COOL.
12
LV SK BG