How To Use - GE Profile 22 Manuel D'utilisation Et D'installation

About CustomCool
LCD Models Only
ExpressThaw
™
ExpressChill
™
.
™
(on some models)
R O
EFRIGERATOR PTIONS
C C
USTOM OOL
P
AN
B
EVERAGE
C
ENTER
B
ACK
LCD Models Only
How it Works
The CustomCool feature is used to quickly
™
chill items, thaw items or hold the pan at a
dampers, a fan, a temperature thermistor and
a heater.

How to Use

Empty the pan. Place the Chill/Thaw tray in
the pan. Place the items on the tray and
close the pan completely.
LCD Models:
Access by: Home > Options > Refrigerator
Options > CustomCool Pan
ExpressChill can be set to 15, 30 or 45
minutes. The default is 15 minutes.
For LCD Models:
Go into that feature's menu and press
the OFF button.
How to Remove and Replace the Drawer
To remove:
Pull the drawer out to the stop position.
Rotate all four swing locks to the unlock
position.
Lift the front of the drawer up and out.
To replace:
Make sure all four swing locks are in the
unlock position.
Place the sides of the drawer into the
drawer supports, making sure the swing
T C
URBO OOL
The pan is tightly sealed to prevent temperature
The controls for this pan are located on the
dispenser with the temperature controls.
NOTE: For food safety reasons, it is
recommended that foods be wrapped in
plastic wrap when using ExpressThaw. This
will help contain meat juices and improve
thawing performance.
Lock all four swing locks by rotating them
to the lock position.
GEAppliances.com
During ExpressThaw and ExpressChill,
the display on the controls will count
down the time in the cycle (on some
models).
After the ExpressThaw cycle is complete,
the pan will reset to the MEAT setting
(32°F [0°C]) to help preserve thawed
items until they are used.
The displayed actual temperature of the
CustomCool pan may vary slightly from
the SET temperature based on usage
and operating environment.
7