GE Profile 22 Manuel D'utilisation Et D'installation page 5

About the temperature controls.
Not all features are on all models. Your controls may be similar to the following
The temperature controls are preset in the factory at 37°F (
refrigerator compartment and 0°F (
Allow 24 hours for the temperature to stabilize to the preset
recommended settings.
Refrigerator temperatures can be adjusted between 34°F and 46°F
(1°C to 8°C), and the freezer temperatures can be adjusted between –6°F
and +8°F (–21°C to –13°C).
To change the Refrigerator temperature:
LCD Models:
Access By: Home > Refrigerator
Activate By: Using the arrows to select the desired temperature.
You must press ENTER to set the new temperature.
To change the Freezer temperature:
Access By: Home > Freezer
Activate By: Using the arrows to select the desired temperature.
You must press ENTER to set the new temperature.
Once the desired temperature has been set, the display will
return to the HOME screen and show the set temperatures
underneath the actual temperature display for several seconds.
Several adjustments may be required. Each time you adjust
the controls, allow 24 hours for the refrigerator to reach the
temperature you have set.
Performance Air Flow System
The Performance Air-Flow System is designed to maximize
temperature control in the refrigerator and freezer
compartments. This unique special feature consists of the
Air Tower along the back wall of the refrigerator and the Air
Tunnel on the bottom portion of the freezer rear wall. Placing
performance. Although the Air Tower and the Air Tunnel can be
removal instructions, on-line, contact us at GEAppliances.com
or call 800.GE.CARES. In Canada, contact us at geappliances.ca or
call 1.800.561.3344.)
LCD models
NOTE:
during installation, remove it now.
for the freezer compartment.
for the
LCD models: Turning the cooling system OFF stops cooling in both the
power to the refrigerator.
LCD Models:
Access By: Home > Options > Information and Settings >
To turn the cooling system back on, press the touch screen and
press the ON button.
Activate By: Pressing ENTER.
GEAppliances.com
:
5