Symbols - GGP ITALY B 28 Manuel D'utilisation

SYMBOLS

2. SYMBOLS
1) Warning! Danger. The failure to use this ma-
chi n e correctly can be hazardous for oneself and
others.
2) Read the instruction manual before using the
ma c hine.
3) If you are using the machine every day in nor-
mal conditions, you can be exposed to a noise
le v el of 85 dB (A) or higher. Wear ear protectors,
safety goggles and a protective helmet.
4) Wear gloves and protective footwear!
5) Danger of flying objects! Keep any people or
pets at least 15 m away when using the machine!
EXPLANATORY SYMBOLS
ON THE MACHINE (if present)
11) Fuel tank
12) E ngine stop switch
positions
a = stop
b = run
c = start
13) C hoke
14) Primer
6) Maximum cutting device speed. Only use sui-
table cutting devices.
7) Do not use the circular saw blade. Danger:
Using the circular saw blade with machines
marked with this symbol exposes the user
to the danger of very serious or even fatal
injuries.
8) Warning! Petrol is flammable. Allow engine to
cool at least 2 minutes before refuelling.
9) Warning! Keep away from hot surfaces.
10) Beware of blade thrust.
EXPLANATORY SYMBOLS
ON THE PROTECTION DEVICES (if present)
EN
21) C utting device
with adequate
protection
22) C utting device
rotation direction
3