Removing The Freezer Drawers - GE 21 Série Manuel D'utilisation

REMOVING THE FREEZER DRAWERS

The freezer drawers can be removed, if needed, to fit
through tight areas.
Read these instructions completely and carefully.
TOP DRAWER
REMOVE THE BASKET
1
A Open the freezer drawer until it stops.
B
Cut the 2 wire ties off of the basket with wire
cutters.
C Lift the front end of the basket so that the front
two alignment tabs come out of the metal slide
brackets first.
D Then rotate the front edge of the drawer up
while lifting the remaining two rear alignment
tabs out of the metal slide brackets. Pull the
basket up and out of the drawer.
Installation Instructions
Tab
23
REMOVE THE DRAWER FRONT FROM
2
THE SLIDES
A Remove the 8 hex head screws from the
drawer and remove the drawer.
B Set the drawer front on a non-scratching
surface.
C
Push the rail assemblies back into the cabinet.