Refrigerator Compartment - GE 21 Série Manuel D'utilisation

About the shelves and bins.
Not all features are on all models.
Some models have wire shelves that can
be adjusted in the same manner.
Rearranging the Shelves
Shelves in the refrigerator compartment are adjustable.

Refrigerator Compartment

To remove:
Remove all items from the shelf.
Tilt the shelf up at the front.
Lift the shelf up at the back and bring
the shelf out.
To replace:
While tilting the shelf up, insert the top
hook at the back of the shelf in a slot on
the track.
Lower the front of the shelf until the
bottom of the shelf locks into place.
Spillproof Shelves
(on some models)
Spillproof shelves have special edges to help
prevent spills from dripping to lower shelves.
To remove or replace the shelves, see
Rearranging the Shelves.
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you to
reach items stored behind others. The special
edges are designed to help prevent spills
from dripping to lower shelves.
To remove:
Remove all items from shelf.
Slide the shelf out until it stops.
Lift the front edge of the shelf until the
central tabs are above the front bar.
Continue pulling the shelf forward until
it can be removed.
(on some models)
To replace:
Place the rear shelf tabs just in front of
the central notches on the shelf frame.
Slide the shelf in until the central tabs are
slightly behind the front bar.
Lower the shelf into place until it is
horizontal and slide the shelf in.
Make sure that the shelf sits flat after
reinstallation and doesn't move freely from
side to side.
Make sure you push the shelves all the way in
before you close the door.
GEAppliances.com
7