Replacing The Light Bulbs; Refrigerator Lights - GE 21 Série Manuel D'utilisation

Replacing the light bulbs.

Turning the control to the 0 (off) position does not remove power to the light circuit.
Light
Shield
Appearance may vary
14

Refrigerator Lights

For models with LED lights:
An authorized technician will need to replace
the LED light.
For models with incandescent lights:
CAUTION:
Light bulbs may
be hot.
Unplug the refrigerator.
To remove the light shield, grasp the
shield at the back and pull out to release
the tabs at the back.
Rotate the shield down and then forward
to release the tabs at the front of
the shield.
Freezer Light
CAUTION:
Light bulbs may
be hot.
Unplug the refrigerator.
Remove the freezer basket for access.
The bulb is located at the rear of the
freezer inside a light shield.
To remove, grasp the shield at the top
and pull out to release the tabs at the
bottom.
After replacing with an appliance bulb
of the same or lower wattage, replace
the shield.
Plug the refrigerator back in.
NOTE: Appliance bulbs may be ordered from
GE Parts and Accessories, 800.626.2002.
After replacing with an appliance bulb
of the same or lower wattage, replace
the shield and freezer basket.
Plug the refrigerator back in.