Operation - Dimplex HPL 6S-TUW Manuel D'utilisation

English

4 Operation

 The heat pump manager is operated using 6 keys: ESC,
MODE, MENU, , , . Different functions are assigned to
 
↵
these buttons according to the current display (Standard or
Menu).
 The operating status of the heat pump and the heating
system is indicated in plain text on a 4 x 20 character LCD
(see Cap. 9 on pag. 17).
4x20 character display;
back-lit
Operator
buttons
Active
lowering
Fig. 4.1: Heat pump manager with detachable main LCD with operator buttons
4 x 20 character display;
Back-lit
Status display HP
(line 1, 2, 3)
Fig. 4.2: Heat pump manager with integrated main LCD with operator buttons
NOTE
The contrast of the display can be brightened with the key combination
(ESC), (MODE), and () or darkened with (ESC), (MODE), and () All
three keys must be pressed and held together until the required contrast
level is set.
NOTE
Keyboard block, child lock
To activate the keyboard block, press and hold the (ESC) key for
approximately five seconds. When activated, the keyboard block symbol
appears on the display. To release the keyboard block, press and hold the
(ESC) key for approximately five seconds.
EN-4
Operating mode
symbols
Status display HP
Heating warmer / colder
(line 1,2,3)
(indicator bar line 4)
Operating mode
symbols
Heating warmer / colder
(indicator bar line 4)
452115.66.36 · FD 9709
 6 different operating modes can be selected:
Cooling, Summer, Auto, Party, Vacation, 2nd heat
generator.
 The menu is made up of 4 main levels:
Settings, Operating data, History, Network
(see Cap. 6 on pag. 6)
Other heat generators
shown as symbols,
see table 4.1
Active
raise
Button functions
Other heat generators
shown as symbols, see table 4.1
Pipe heater
Immersion heater
Oil boiler
Flange heater
Supplementary heating
Table 4.1: Display symbols
Wärmepumpenmanager
L23