What Is What; Type-Identical Markings - Dräger FPS 7000 RP Notice D'utilisation

What is what?

– Full face mask (Figure A1)
– Mask/helmet combination (Figure A2)
– Connector (Figure A3)
1 Head harness
3 Visor
5 Inner mask
7 Button
9 Covering cap of the drinking
valve
11 Cap
13 Neck strap
15 Helmet
17 Chin strap
19 Speech diaphragm
21 Clamping ring
2 Upper visor frame
4 Wiper
6 Lower visor frame
8 Wiper handle
10 Drinking valve with
mouthpiece
12 Mask body
14 Adjuster buckle
16 Mask/helmet adapter
18 Mask guide
20 O-ring
(approved by Dekra Exam)

Type-identical markings

The Dräger FPS 7000 RP have different marks:
Connector RP
Mask body EPDM or Si,
EN 136:1998 CL.3+,
CExxx (notified body in Europe)
Size of mask body S (small), M (medium), L (large)
Size of inner mask 1 (small), 2 (medium), 3 (large)
Visor PCas or APECas (coated with scratch-
resistant material on both sides), F (fire
brigade), according to EN 166
A (ballistic protection class 190 m/s)
T (ballistic protection at extreme
temperatures, tested at –30 °C ... +60 °C
with 190 m/s)
Head harness EPDM, CR or Si, M/L or S
Hairnet H
Mask/helmet adapter S-fix/H61 or
Q-fix/H62
Drinking tube TR
connector
21