Pin Assignment - Sony PVM-2551MD Instructions D'utilisation

Masquer les pouces Voir aussi pour PVM-2551MD:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Pressure
700 hPa to 1060 hPa
Storage and transport temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage and transport humidity
0% to 90% (no condensation allowed)
Storage and transport pressure
700 hPa to 1060 hPa
Accessories supplied
AC adaptor (AC-110MD) (1)
AC power cord (1)
AC plug holder (2)
Instructions for Use (1)
CD-ROM (1)
Using the CD-ROM Manual (1)
Quick Reference (1)
When you First Use the Monitor (1)
Sales Companies Guide (1)
Optional accessories
SDI 4:2:2 input adaptor
BKM-220D
HD/D1-SDI input adaptor
BKM-243HSM
NTSC/PAL input adaptor
BKM-227W
Analog component input adaptor
BKM-229X
3G/HD/SD-SDI input adaptor
BKM-250TGM
DVI-D input adaptor
BKM-256DD
Monitor stand
SU-560
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of water:
Ordinary
Degree of safety in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous
oxide:
Not suitable for use in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous
oxide
Mode of operation:
Continuous
Design and specifications are subject to change without
notice.
80
Specifications
Note
Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE LOSS
OF PRESENT OR PROSPECTIVE PROFITS DUE
TO FAILURE OF THIS UNIT, EITHER DURING
THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR FOR ANY
OTHER REASON WHATSOEVER.

Pin assignment

PARALLEL REMOTE connector
Modular connector
(8-pin)
Pin number
Functions
1
Designating Y/C input signal
2
Designating RGB input signal
3
Designating OPTION A-1 input signal
4
Designating OPTION A-2 input signal
5
GND
6
Tally lamp ON/OFF
7
Full screen
8
Over scan
You can allocate functions using the REMOTE menu
(see page 75).
Wiring required to use the Remote Control
Connect the function you want to use with a Remote
Control to the Ground (Pin 5).
SERIAL REMOTE (RS-232C) connector
D-sub 9-pin, female
5
1
9
6
Pin number
Signal
1
NC
2
RX
3
TX
4
NC
5
GND
6
GND
7
RTS
8
CTS
1
8

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pvm-2551nb

Table des Matières