Sony PVM-2551MD Instructions D'utilisation page 46

3. The leakage current could increase when connected
to other equipment.
4. For this particular equipment, all accessory
equipment connected as noted above, must be
connected to mains via an additional isolation
transformer conforming with the construction
requirements of IEC60601-1 and providing at least
Basic Insulation.
5. This equipment generates, uses, and can radiate radio
frequency energy. If it is not installed and used in
accordance with the instruction manual, it may cause
interference to other equipment. If this unit causes
interference (which can be determined by
unplugging the power cord from the unit), try these
measures: Relocate the unit with respect to the
susceptible equipment. Plug this unit and the
susceptible equipment into different branch circuit.
Important EMC notices for use in the medical environments
• The PVM-2551MD/2551NB needs special
precautions regarding EMC and needs to be installed
and put into service according to the EMC information
provided in this instructions for use.
• The portable and mobile RF communications
equipment such as cellular phones can affect the
PVM-2551MD/2551NB.
Warning
The use of accessories and cables other than those
specified, with the exception of replacement parts sold
by Sony Corporation, may result in increased emissions
or decreased immunity of the PVM-2551MD/2551NB.
The PVM-2551MD/2551NB is intended for use in the electromagnetic environment specified below.
The customer or the user of the PVM-2551MD/2551NB should assure that it is used in such an environment.
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Warning
If the PVM-2551MD/2551NB should be used adjacent
to or stacked with other equipment, it should be
observed to verify normal operation in the
configuration in which it will be used.
46
Guidance and manufacturer's declaration-electromagnetic emissions
Compliance
Group 1
Class B
Class D
Complies
Consult your dealer. (According to standard IEC60601-
1-2 and CISPR11, Class B, Group 1)
6. Model PVM-2551MD/2551NB is a monitor
intended for use in a medical environment to display
pictures from cameras or other systems, other than
diagnostic X-ray equipment.
Electromagnetic environment-guidance
The PVM-2551MD/2551NB uses RF energy only for its
internal function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby electronic
equipment.
The PVM-2551MD/2551NB is suitable for use in all
establishments, including domestic establishments and those
directly connected to the public low-voltage power supply
network that supplies buildings used for domestic purposes.