Functions - Sony PVM-2551MD Instructions D'utilisation

and SD-SDI, but also 3G-SDI, which transmits twice as
much data as HD-SDI with a Single-link.
*4
Multi-format
NTSC or PAL color system or DTV format, such as
720p, 1080i, etc. can be selected automatically.
*4
For acceptable formats, see "Available signal formats" on
page 81.
External sync input
The unit can be operated on the sync signal supplied
from an external sync generator.

Functions

APA (Auto Pixel Alignment) function
You can display pictures from the HD15 input connector
in the appropriate picture by simply pressing the
function button that APA is assigned.
Automatic termination (connector with
mark only)
The input connector is terminated internally at 75 ohms
when nothing has been connected to the output
connector. If a cable is connected to the output
connector, the internal terminal is automatically
released and the signals input to the input connector are
output to the output connector (loop-through).
Select color temperature and gamma mode
You can select the color temperature from among three
(D93, D65, D56) settings and gamma mode from among
six settings (1.8, 2.0, 2.2, 2.4, 2.6, DICOM). You can
also adjust the color temperature to the appropriate
setting in "USER1," "USER2," "USER3," "USER4" or
"USER5."
Two-display
Two kinds of input signals are put on the monitor.
For more information, see "MULTI DISPLAY
SETTING" on page 72.
Color space feature
You can select ITU-R BT.709, EBU or SMPTE-C for the
color space settings.
Aspect setting
You can set the monitor to 4:3 or 16:9 display mode
according to the input signal.
*5
Scan function
You can select the display from among "NORMAL,"
"OVER," "FULL" and "NATIVE."
*5
For selectable modes, see "Input Signals and Adjustable/
Setting Items" on page 57.
54
Features
Select language display
You can select your language for the display from seven
languages - English, French, German, Spanish, Italian,
Japanese and Chinese.
Screen saver
To reduce burn-in, the brightness of the screen can be
automatically decreased when a still image is displayed
for more than 10 minutes.
Key inhibit function
You can inhibit the key to prevent missing an operation.
User memory function
You can save the 20 picture settings with the name. The
user memory data can be saved or loaded between the
monitor and the equipment (PC, etc.) connected in
serial remote mode.
Two kinds of ground terminals
Two kinds of ground terminals are built into the monitor
to equal the electric potential.
External remote function
The input signal is selected or various items are adjusted
by use of the serial (Ethernet) remote function. You can
connect this unit to the monitor by the Ethernet
(10BASE-T/100BASE-TX) connection and controlled
remotely on the network.
For more information, see SERIAL REMOTE of
REMOTE menu on page 76.
Other
Optional stand
It is more convenient to install the monitor on a desk by
using the optional stand (SU-560).