Troubleshooting - Sony PVM-2551MD Instructions D'utilisation

The menu for setting the user name appears.
U S E R M E M O RY 1 / 3
0 1 U S E R 0 1
+ – C H A N G E C H A R .
E N T E R C U R S O R
[ ]
[ R E T U R N ] C A N C E L
[ U S E R M E M
3
Change the user name.
• Press the ENTER button to move the cursor to the
character position to be changed.
• Press the + or – button to change the character.
Usable characters: "A to Z," "0 to 9," ".", "/", ",",
_ (space)
" ", "-", "
Usable number of characters: Maximum 18
characters.
• Enter a space to clear the character.
• When the ENTER button is pressed after
changing the character, the character is confirmed
and the cursor moves to the following character.
4
Press the USER MEM button.
The settings are saved and the USER MEMORY
setting menu appears.
To close the menu without saving the setting
Press the RETURN button.
The USER MEMORY setting menu appears.
78

Troubleshooting

] S AV E
"
Troubleshooting
This section may help you isolate the cause of a problem
and as a result, eliminate the need to contact technical
support.
• The display is colored in green or purple t Select
the correct input by pressing RGB or COMPONENT
button.
• The unit cannot be operated t The key protection
function works. Set the KEY INHIBIT setting to OFF
in the KEY INHIBIT menu.
• The black bars appear at the upper and lower
positions of the display t When the signal aspect
ratio is different from that of the panel, the black bars
appear. This is not a failure of the unit.