Receiving Calls - Sony SPP-206 Mode D'emploi

Receiving calls

TALK/BATT
LOW lamp
VOL switch
(HOLD)
(1)
(0)
Additional tasks
To
Put a call on hold
Switch to another call
("call waiting" service*)
Turn on/off the ringer
of the handset
Adjust the ringer volume of
the base phone
* Contact your telephone company to subscribe to this service.
Receiving calls through the speakerphone
When you hear the phone ring, press
(SPEAKERPHONE) on the base phone.
The LINE lamp lights up.
To adjust the speaker volume, slide the
SPEAKER VOLUME control.
When you're done talking, press
(SPEAKERPHONE) again.
To obtain the best speakerphone
performance, see page 12.
(FLASH)
(#)
(SPEED DIAL/PGM)
Do this
Press (HOLD).
The TALK/BATT LOW lamp flashes slowly.
Press (TALK) to resume the conversation.
Press (FLASH).
Press (FLASH) again to return to the first caller.
Press (SPEED DIAL/PGM) ,(#) and (1) to turn the
ringer on, or (0) to turn it off.
Then press (SPEED DIAL/PGM).
Set the RINGER switch to H (high), L (low) or OFF.
1
When you hear the phone ring:
• Press (TALK) (or any dialing
key).
or
• Pick up the handset from the
base phone when the handset is
placed on the base phone.
The TALK/BATT LOW lamp on
the handset and the LINE lamp on
the base phone light up.
2
When you are done talking, press
(OFF) or replace the handset on the
base phone.
The TALK/BATT LOW lamp on
the handset and the LINE lamp on
the base phone go off.
RINGER switch
(SPEAKERPHONE)
SPEAKER
VOLUME
control
LINE lamp
13
EN
Basics