Receiving Calls - Sony SPP-A700 Mode D'emploi

Receiving calls

Tip
If you have subscribed to the Caller ID service;
• the caller's number and/or name appears on the display when you receive a call (see page 30)
• the ringer sound changes to a higher tone if the call matches the number stored in the Phone
Directory (memory match function; see page 30).
To switch to another call ("call waiting" service*)
Press (CALL WAITING/FLASH).
Press the button again to get back to the first caller.
* Contact your telephone company to subscribe to this service.
To turn the ringer off
Set the RING ON/OFF switch to OFF.
The handset won't ring. You can still make calls, and also
receive calls if another telephone connected to the same line
rings to inform you on incoming calls, but you can't page the
handset from the base unit.
1
2
(CALL WAITING/FLASH)
When you hear the phone ring,
pick up the handset from the
base unit, and press (TALK) .
"TALK" appears on the display.
When you're done talking, press
(OFF) or replace the handset on
the base unit.
The display goes off.
RING ON/
OFF switch
EN
15
Basics