Entering Your Area Code - Sony SPP-A700 Mode D'emploi

Step 4

Entering your area code

When you use this phone for the first time, or move to an area that has
a different area code, you must enter your area code.
This is necessary because the phone must distinguish local or long
distance calls to properly dial calls from the Caller ID list.
Notes
• If an area code is already entered, it appears on the display in step 3. To enter
a different area code, see "To change the area code" below.
• Do not allow more than 20 seconds to elapse between each step of the procedure.
Tips
• You may press (ENTER) instead of (PGM) in step 5.
• To check the current area code, perform steps 1 to 3 above. The area code
appears on the display for 20 seconds.
To change the area code
1
Perform steps 1 to 3 above.
The current area code appears on the display.
2
Enter a new area code using the dialing keys.
3
Press (PGM).
You hear a long confirmation beep.
1
Press (PGM).
2
Press 4 to make "AREA" flash.
DIRECTORY AREA
3
Press (ENTER).
"ENTER AREA CODE" appears
on the display.
4
Enter three digits of your area
code using the dialing keys.
5
Press (PGM).
You hear a long confirmation
beep.
EN
11
Getting Started