Sony SPP-A700 Mode D'emploi page 43

Symptom
The caller's name and/or
phone number does not appear
on the display.
The caller's name and/or
phone number does not appear
on the display during call
waiting.
You cannot dial the number
from the Caller ID list.
The memory match function
does not work.
The CHARGE/IN USE lamp
doesn't light up when you
place the handset to charge.
The battery duration is short.
Remedy
• Make sure you have subscribed to Caller ID service.
• Caller ID service may not work when the phone is
connected to a Private Branch Exchange (PBX).
• The call is made through company which does not
offer Caller ID service. "OUT OF AREA" will appear
on the display.
• The call was "blocked." "PRIVATE" will appear on
the display.
• You answered the call while "**RINGING**"is
displayed. Be sure to answer after the Caller ID data is
displayed.
• Make sure you have subscribed to "Caller ID with
Visual Call Waiting" service (see page 37).
• Make sure nobody is talking on another phone on the
same telephone line.
• Make sure you entered your area code correctly
(page 11).
• You may need to change the number of digits of the
phone number (page 36).
• This function may not work when the phone is
connected to a Private Branch Exchange (PBX).
• If the call is from an office which uses multiple lines,
the phone number may not match the number you
put in the memory.
• If you stored the phone number with an outside line
access digit in the Phone Directory because the phone
is connected to a Private Branch Exchange (PBX), the
phone number will not match the Caller ID data.
• Wipe the charge terminals of the base unit and the
handset with a soft cloth or paper for better contact of
the charge terminals.
• Make sure the handset is placed on the base unit
properly.
• The battery pack was charged less than 12 hours (due
to power failure, etc.).
• The usable life of the battery has expired and needs
replacement.
continuación
Additional Information
43 EN