Sony SPP-A700 Mode D'emploi page 17

4
Press (PGM).
"ENTER NUMBER" appears.
5
Enter the phone number.
You can enter up to 16 digits, including a tone
and a pause, each of which is counted as one
digit.
6
Press (PGM).
You hear a long confirmation beep, and the name and the number are
stored.
Notes
• If you try to save a 21st phone number, you will hear five short error beeps
and "MEMORY FULL" will be displayed. You cannot store the phone
number. To store another phone number, erase one of the stored phone
numbers (see page 18).
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tips
• If you have entered a wrong name or number in step 3 or 5, press $ to erase
it. Then enter the correct name or number.
• You may press (ENTER) instead of (PGM) in steps 4 and 6.
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in step 5 above, do as follows:
1
Enter the outside line access digit (e,g., 9).
2
Press (REDIAL/PAUSE).
SONY
1234567
continued
Telephone Features
17 EN