Sony SPP-206 Mode D'emploi page 7

Connecting the base phone
If you want to hang the base phone on the wall, see page 24.
Route the cord.
3
To AC outlet
AC power adaptor
(supplied)
2
To telephone outlet
4
To DC IN 9 V
Telephone line cord
(supplied)
To LINE
1
Aligh the ¢
marks.
1
Attach the wall bracket on the
bottom of the base phone as
illustrated to use it as a stand.
2
Connect the telephone line cord
to the LINE jack, and to a
telephone outlet.
3
Connect the AC power adaptor
to the DC IN 9V jack, and to an
AC outlet.
4
Fully extend the antenna. Make
sure it points toward the ceiling.
2
1
continued
7
EN
Getting Started