Storing Phone Numbers On The Base Phone - Sony SPP-206 Mode D'emploi

Storing phone numbers on the base phone

(REDIAL/PAUSE)
Notes
• Do not allow more than 20 seconds to elapse between each step of the procedure.
• You cannot store phone numbers on the base phone while the handset is
being used. The LINE lamp will light up to indicate this condition.
Tip
If you enter a wrong number, press (SPEED DIAL/PGM), then start from the
beginning.
To store the previous number dialed
Press (REDIAL/PAUSE) directly after step 2, then go to step 4.
LINE lamp
1
Press (SPEED DIAL/PGM).
The LINE lamp flashes quickly.
2
Press one of the dialing keys ((0)
to (9)) for the phone number to
be stored.
You will hear a confirmation
beep.
3
Enter the phone number you
want to store.
You can enter up to 16 digits,
including a tone and a pause,
each of which is counted as one
digit.
4
Press (SPEED DIAL/PGM).
You will hear a long confirmation
beep, and the number is stored.
The LINE lamp goes off.
continued
15
Advanced Features
EN