Object Lighting On /Off; Adjusting Image Control; Adjusting The Brightness; Displaying System Information On Screen - Optelec ClearView+ Manuel D'utilisation

Optelec

Object lighting ON /OFF

Pressing this button for four seconds turns off the
object lighting. You can choose this option to make it
easier to read glossy articles such as magazines
and photos. Pressing the button once will advance the
viewing mode by one position and will turn the lights back
on; or pressing the button for four seconds will turn the
object lighting back to the same viewing mode.

Adjusting image control

Press and hold the right or left side of this button to
adjust the image control. The image control may be
adjusted to make the characters or other on-screen
elements sharper, if they are not clearly visible.
Please note: If the default control setting is changed on
your ClearView
brightness.

Adjusting the brightness

Press the left or right adjustment button while
pressing the auto-focus button to adjust the
brightness.
Please note: If the default control setting is changed on
your ClearView
image control.
Displaying system information on-screen
The magnification factor and the system configuration
(system modules) can be displayed on-screen. Press
the auto-focus button for four seconds to have this
information displayed. Press it once again for four
seconds to turn this feature off.
English
+
, pressing this button will adjust the
+
, pressing these buttons will adjust the
+
ClearView
14