Introduction; About This Manual; Getting To Know Your Clearview Speech; Switching The Clearview Speech On And Off - Optelec ClearView Speech Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 37
Optelec
1.

Introduction

Congratulations on choosing the Optelec ClearView Speech, an intuitive video magnifier to listen
to, view and magnify text.
The ClearView Speech will add speech as well as full page overview, a picture viewer and fast
document navigation to your ClearView C or ClearView

1.1 About this manual

At Optelec, we are constantly improving our products and their functionality. Therefore, it is
possible that this manual is not the latest version. Please download the most up-to-date manual
on
www.optelec.com
This manual will familiarize you with the speech features and functions of the ClearView Speech.
Please read this manual carefully before using your ClearView Speech. For the standard
ClearView video magnifier functionality, please refer to your ClearView C or ClearView
2.

Getting to know your ClearView Speech

This chapter will familiarize you with the operation of the Optelec ClearView Speech.

2.1 Switching the ClearView Speech on and off

To switch on both the ClearView and ClearView Speech, press the ON / OFF button. It takes
about 10 seconds for the ClearView to initialize before it displays an image. In addition, the start-
up process for the ClearView Speech module will take approximately 40 seconds. You will hear
the start-up sound to indicate that the ClearView Speech is ready to use.
To switch off the ClearView Speech, press the ON / OFF button again. The ClearView will switch
off after which it will take approximately one minute for the ClearView Speech to power down.

2.2 Resetting the ClearView Speech

In case a reset of the ClearView Speech is needed, press the black button, located on the right
side of the monitor above the SD card slot to power down the ClearView Speech. This will take
approximately 15 seconds. Press this button again after 15 seconds to switch the ClearView
Speech back on. After about 40 seconds, the ClearView Speech will play the start-up sound to
indicate it is ready to use again.

2.3 Getting started

To get started with your ClearView Speech:
Step 1:
Switch the ClearView Speech on with the <Orange>
button.
Step 2:
English
at the Support section.
+
.
ClearView Speech
+
manual.
7

Publicité

Table des Matières
loading

Table des Matières