Activating Line Markers / Window Shades; Switching Between The Clearview; Sizing The Line Markers / Window Shades & Picture-In-Picture Image - Optelec ClearView+ Manuel D'utilisation

Optelec

Activating line markers / window shades

Pressing this button cycles you through line markers,
window shades and full-screen camera image. Line
markers are used as guides to make reading text
Switching
computer / external source image
If a computer or another external source is connected to the
+
ClearView , press this button or the footswitch, if fitted, to
toggle between the ClearView
computer image.
Sizing the line markers
When line markers or window shades are activated,
turning this button will allow you to modify the space
between the line markers / window edges in either in a
horizontal or vertical position depending on the status of the
horizontal / vertical button described below
English
easier. The window shades function
may be used to block a part of an
image, when the screen brightness
becomes
needing to concentrate on only one or
two lines of text is preferred.
between the
inconvenient
+
ClearView
+
image or the full-screen
ClearView
or when
and a
.
+
23