Safety And Care - Optelec ClearView+ Manuel D'utilisation

Optelec

2. Safety and Care

Please read the instructions carefully before setting up your
+
ClearView . Keep this user manual for future reference.
 Use the ClearView
to extreme or rapid changes in temperature or humidity.
Do not place the ClearView
where it may be exposed to direct sunlight. These
conditions may damage the CV
components.
 Do not place the CV
causing serious damage to the unit, or injury to the user.
 If using your own monitor mounted on top of the
+
ClearView
than 16 kg. The ClearView
designed to support a maximum of 16 kg.
 Firmly grip the monitor by the surrounding frame when
positioning to ensure stability to the entire system. When
readjusting the 22" or the 24" monitor with the five-
directional ultra-flexible TFT arm, please ensure the
monitor does not tilt or rotate against the wings of the
electronic box.
 The reading table and the monitor arm contain movable
parts. Please be careful when adjusting the screen
position, or when operating the reading table as to
prevent fingers or any loose clothing from getting caught
in the operating mechanism. If you have difficulty
operating the CV
contact your Optelec distributor.
 Contact your Optelec distributor to service this device if
necessary. Do not open your CV
warranty.
English
+ +
(CV ) indoors. Do not expose the CV
+
on an unstable surface. It may fall,
system, make sure it does not weigh more
+
safely, please seek assistance or
+
near a radiator or heater, or
+
's electronic or optical
+
Monitor Platform was
+
; this will void the
ClearView+
+
8